-
Pulse Control 2 Phase Closed Loop Stepper Drive T60Plus
I-T60PLUS ivaliwe i-loop stepper drive, ene-encoder Z signal input kanye nemisebenzi yokukhipha.Ihlanganisa imbobo yokuxhumana ye-miniUSB ukuze kube lula ukulungisa iphutha lamapharamitha ahlobene.
I-T60PLUS ifanisa ama-loop stepper motors avaliwe anesignali engu-Z ngaphansi kuka-60mm
• Imodi ye-Pulse: PUL&DIR/CW&CCW
• Izinga lesiginali: 5V/24V
• l Amandla kagesi: 18-48VDC, futhi 36 noma 48V kunconyiwe.
• Izinhlelo zokusebenza ezijwayelekile: Umshini woku-auto-screwdriving, i-servo dispenser, umshini wokuhlubula izintambo, umshini wokulebula, umtshina wezokwelapha,
• izinto zokuhlanganisa zikagesi njll.
-
Pulse Control 2 Phase Closed Loop Stepper Drive T86
I-Ethernet fieldbus-controlled stepper drive EPR60 isebenzisa iphrothokholi ye-Modbus TCP esekelwe esibonakalayo esijwayelekile se-Ethernet
I-T86 ivaliwe i-loop stepper drive, esekelwe ku-32-bit DSP yesikhulumi, ubuchwepheshe bokulawula i-vector eyakhelwe ngaphakathi kanye nomsebenzi wokudilizwa kwe-servo, kuhlanganiswe nempendulo yesishumeki semoto esivaliwe, kwenza uhlelo oluvaliwe lwe-loop stepper lube nezici zomsindo ophansi,
ukushisa okuphansi, akukho ukulahlekelwa kwesinyathelo kanye nesivinini esiphezulu sohlelo lokusebenza, esingathuthukisa ukusebenza kwesistimu yemishini ehlakaniphile kuzo zonke izici.
I-T86 ifanisa amamotho avaliwe- loop stepper angaphansi kuka-86mm.• Imodi ye-Pulse: PUL&DIR/CW&CCW
• Izinga lesiginali: 3.3-24V ehambisanayo;ukumelana kwe-serial akudingeki ekusetshenzisweni kwe-PLC.
• I-voltage yamandla: 18-110VDC noma 18-80VAC, kanye ne-48VAC enconyiwe.
• Izinhlelo zokusebenza ezijwayelekile: Umshini woku-auto-screwdriving, i-servo dispenser, umshini wokuhlubula izintambo, umshini wokulebula, umtshina wezokwelapha,
• izinto zokuhlanganisa zikagesi njll
-
IHybrid 2 Phase Closed Loop Stepper Drive DS86
Idrayivu yesitebhisi eyisibonisi sedijithali ye-DS86, esekelwe kuplathifomu yedijithali ye-DSP engu-32-bit, enobuchwepheshe bokulawula i-vector obakhelwe ngaphakathi nomsebenzi wokwehlisa i-servo.Uhlelo lwe-DS stepper servo lunezici zomsindo ophansi nokushisa okuphansi.
I-DS86 isetshenziselwa ukushayela i-valve-loop motor enezigaba ezimbili ngaphansi kuka-86mm
• Imodi ye-Pulse: PUL&DIR/CW&CCW
• Izinga lesiginali: 3.3-24V ehambisanayo;ukumelana kwe-serial akudingeki ekusetshenzisweni kwe-PLC.
• I-voltage yamandla: 24-100VDC noma 18-80VAC, kanye ne-75VAC enconyiwe.
• Izinhlelo zokusebenza ezijwayelekile: Umshini woku-auto-screwdriving, umshini wokuhlubula izintambo, umshini wokulebula, umshini wokuqopha, okokusebenza kokuhlanganiswa kwe-elekthronikhi njll.
-
Pulse Control 3 Phase Closed Loop Stepper Drive NT110
I-NT110 digital display 3 phase closed loop stepper drive, esekelwe ku-32-bit yedijithali ye-DSP yesikhulumi, ubuchwepheshe bokulawula i-vector eyakhelwe ngaphakathi kanye nomsebenzi wokwehlisa i-servo, kwenza isistimu ye-loop stepper evaliwe ibe nezici zomsindo ophansi nokushisa okuphansi.
I-NT110 isetshenziselwa ukushayela i-3 isigaba 110mm kanye ne-86mm evaliwe i-loop stepper motors, ukuxhumana kwe-RS485 kuyatholakala.
• Imodi ye-Pulse: PUL&DIR/CW&CCW
• Izinga lesiginali: 3.3-24V ehambisanayo;ukumelana kwe-serial akudingeki ekusetshenzisweni kwe-PLC.
• I-voltage yamandla: 110-230VAC, kanye ne-220VAC iyanconywa.
• Izicelo ezijwayelekile: umshini wokushisela, umshini wokuhlubula izintambo, umshini wokulebula, umshini wokubaza, izinto zokuhlanganisa zikagesi njll.
-
Isigaba Esivaliwe I-Loop Stepper Motor Series
● Isifaki khodi esakhelwe ngaphakathi, ukulungiswa okuphezulu kwesiginali ye-Z.
● Idizayini engasindi yochungechunge lwe-AM inciphisa ukufakwa.
● Isikhala senjini.
● Ibhuleki kazibuthe elihlala njalo liyazikhethela, ibhuleki le-Z-axis liyashesha.
-
Isigaba Esivaliwe I-Loop Stepper Motor Series
● Isifaki khodi esakhelwe ngaphakathi, ukulungiswa okuphezulu kwesiginali ye-Z.
● Idizayini engasindi yochungechunge lwe-AM inciphisa ukufakwa.
● Isikhala senjini.
● Ibhuleki kazibuthe elihlala njalo liyazikhethela, ibhuleki le-Z-axis liyashesha.
